Alley Bump 3-in Thick Zero-Speed Bump
Item #: 434-6026
$177.00 / EA
List Price: $177.00
You Save: $0.00 (0%)
BEST PRICE GUARANTEE
!
(In the continental US only)
Buy More and Save!
| Price |
|
Qty |
| $177.00 |
/ Each |
1+ |
QTY:
Click to Select Speed Bump Mounting Hardware
Alley bumps were developed specifically to address speeding and cut-through traffic in city alleyways, slowing cars to 1-5 mph (this is only an approximation). Constructed from 100% recycled tires, the flexible design conforms to the contour of virtually any road surface. Pre-drilled holes for anchoring spikes or lag bolts, alley bumps are simple to install and can be easily removed for storage or relocation. The bumps are available in 4’-30' lengths, for your convenience all of the lengths are configured from 4 or 6 Ft. sections. End caps may be purchased to protect the alley bump ends and vehicles. The channeled bottom helps facilitate drainage as well as cover cabling or piping.
They are designed to withstand extreme weather and stress, and are resistant to moisture, oil, temperature variations, and ultraviolet light. They will not warp, crack, chip, or rot, and are covered by a 3 year warranty on the product and a 1 year warranty on the tape (under normal usage).
End Cap Dimensions:
6"L x 12"W x 3"H
Assembled Dimensions:
4 Ft: 48"L x 12"W x 3"H6 Ft: 72"L x 12"W x 3"H
8 Ft: 96"L x 12"W x 3"H - (2 x 4 Ft.)
10 Ft: 120"L x 12"W x 3"H - (1 x 4 Ft.)+(1 x 6 Ft.)
12 Ft: 144"L x 12"W x 3"H - (2 x 6 Ft.)
14 Ft: 168"L x 12"W x 3"H -(2 x 4 Ft.)+(1 x 6 Ft)
16 Ft: 192"L x 12"W x 3"H - (2 x 6 Ft.)+(1 x 4 Ft.)
18 Ft: 216"L x 12"W x 3"H - (3 x 6 Ft.)
20 Ft: 240"L x 12"W x 3"H - (2 x 6 Ft.)+(2 x 4 Ft.)
22 Ft: 264"L x 12"W x 3"H - (3 x 6 Ft.)+(1 x 4 Ft)
24 Ft: 288"L x 12"W x 3"H - (4 x 6 Ft.)
26 Ft: 312"L x 12"W x 3"H - (3 x 6Ft.)+(2 x 4Ft)
28 Ft: 336"L x 12"W x 3"H - (4 x 6 Ft.)+(1 x 4 Ft.)
30 Ft: 360"L x 12"W x 3"H - (5 x 6 Ft.)